Nortel NT8D14. 8 analog trunk card for switches Nortel Meridian 1 Option 11C.

Nortel NT8D14 card for 8 analog trunks is used in switches Nortel Meridian 1 Option 11C.

Nortel NTD14 card gives you the ability to connect up to 8 analog trunks to switches Nortel Meridian 1 Option 11C.

Each analog trunk card NTD14 Nortel is set independently by the control software using the program LD 14 for core management.

Nortel NTD14 card uses a space in the main cabinet or cabinet NTAK11BD expansion NTAK11BD and can be installed in any space.

Nortel NTD14 card has a size of 31.75 cm by 25.50 cm.

Nortel NT8D14 card for 8 analog trunks connected to the rear of the main cabinet or cabinet NTAK11BD NTAK11BD expansion through a 160-pin connector. The back of the cabinet is wired to the input / output panel, which is wired to a main dealer through a 25-pair cable.

The front Nortel NT8D14 card is equipped with an LED, which stays on for two to five seconds to do their own testing when installed. If your own test is successful, the LED blinks three times and stays lit. When the card is configured and enabled in the software, the LED turns off. If the LED blinks or stays on continuously weakly, replace the card.

Nortel NTD14 card has the ability to connect up to 8 analog trunks to switches Nortel Meridian 1 Option 11C.