Nortel NT8D03. 16 analog extension card for switches Nortel Meridian 1 Option 11C.

Nortel NT8D03 card for 16 analog extension is used in switches Nortel Meridian 1 Option 11C.

Nortel NT8D03 card gives you the ability to connect up to 16 analog extensions to the switches Nortel Meridian 1 Option 11C.

Each analog extension card is configured Nortel NT8D03 independently by the control software using the program administration LD 10 for analog phones.

Nortel NT8D03 card uses a space in the main cabinet or cabinet NTAK11BD expansion NTAK11BD and can be installed in any space.

Nortel NT8D03 card has a size of 31.75 cm by 25.50 cm.

Nortel NT8D03 card for 16 analog extensions connected to the rear of the main cabinet or cabinet NTAK11BD NTAK11BD expansion through a 160-pin connector. The back of the cabinet is wired to the input / output panel, which is wired to a main dealer through a 25-pair cable.

The front Nortel NT8D03 card is equipped with an LED, which stays on for two to five seconds to do their own testing when installed. If your own test is successful, the LED blinks three times and stays lit. When the card is configured and enabled in the software, the LED turns off. If the LED blinks or stays on continuously weakly, replace the card.

Nortel NT8D03 card has the ability to connect up to 16 extensions analogue switches Nortel Meridian 1 Option 11C.

16 analog extension card with message waiting NT8D09.